best temperature for dabs

Low Temp Dabs VS High: The Perfect Temperature for Dab Potency and Flavor

By Tommy Joyce | July 27, 2019 | Dabbing

When dabbing, a small dose of cannabis concentrate is dropped onto a hot “nail” to vaporize the cannabinoids and terpenes contained within – all the good stuff. Cannabinoids are chemicals like THC, CBD, and other beneficial compounds found in cannabis (and concentrates), while terpenes are the aromatic compounds that give cannabis products their taste and smell.

For example, limonene is a terpene that’s also found in citrus fruits like lemons and limes (as well as “lemon” varieties of garden herbs, such as lemon thyme or lemon basil). These compounds (the primary constituents of cannabis concentrates) boil — or vaporize — between 315-440°F (157-227°C).

That threshold, therefore, is the minimum temperature range required to fully vaporize the cannabinoids and terpenes in your concentrate. THC dabs are, of course, ever-popular, but there’s something to be said for dabbing CBD isolate or concentrates, especially for medicinal purposes. The best part about dabbing CBD is the ability to achieve fast-acting symptom relief, even for intense symptoms. Keep in mind, a quality dab rig and a reliable dabbing torch makes a big difference in your experience.

The Temperature Trade-Off

With regards to dabbing, the temperature should be looked as a continuum from too low to too high — it’s a spectrum, after all.

Why you should Low-Temp Dab: You’ll get more flavor from your concentrate, which is especially nice if you’ve got your hands on a particularly tasty terpene-forward dab. You’ll also be able to take smoother, longer hits.

The downside: The vapor produced at lower temperatures isn’t as dense, produces milder effects, and may leave some concentrate behind (as opposed to fully vaporizing the concentrate as intended).

Why you should High-Temp Dab: You’ll create a deliciously thick vapor that’s dense and satisfying, you’ll feel the effects of your concentrate more intensely (due to more complete vaporization), and all concentrate will be consumed, leaving behind no traces or residue that can muddy the taste of future dabs.

The downside: At higher temperatures, you’ll lose some of the flavor intensity, especially the sweeter notes. The vapor becomes more bitter and, therefore, harsher on the lungs and throat. This, in turn, means it’s harder to take large hits without being reduced to a coughing fit.

Please bear in mind that this guide pertains to dabbing surface temperature, NOT the set temperature on an electric nail (which is likely higher).

0-300°F: Too low

This will result in minimal vaporization of available cannabinoids and terpenes, but not much – you will not be consuming anywhere near all the concentrate dropped on the nail. Expect the concentrate to leave a puddle of oil on the dabbing surface that produces little vapor (colloquially, “waste it to taste it”).

315-450°F: Low temp dab

This is the “sweet spot” for vaporization of all cannabinoids and terpenes while retaining maximum flavor. Dabbing at this temperature will produce a smooth hit that is relatively easy on the lungs and very terpene-forward in flavor. The effects will be pleasant, though milder than they would be at hotter temperatures.

450-600°F: Medium temp dab

This is a good middle ground for those seeking a balance of flavor and intensity. At this temperature, a mix of vaporization and combustion occurs, meaning that what you’re inhaling with your hit is a mixture of vapor and smoke. This means that a dab at this temperature may be harder on your lungs, especially if you tend to cough easily.

600-900°F: High temp dab

At this temperature, the nail may still be glowingly hot and combustion is certain to occur. This will produce a harsh, intense hit with thick smoke — a little vapor, but not much. At this temperature, you’re more burning your dab than flash-vaporizing it. Most of the flavor will be lost at this temperature, resulting in a dab that tastes bitter, harsh, and rather burnt. It’s effective, sure, but it probably won’t be the smoothest dab you’ve taken.

900+°F: Burning the dab

We don’t recommend taking dabs at this temperature – it is not pleasant. Even the tastiest of concentrates are rendered acrid and charred-tasting at this temperature. This level of heat is better suited to a kiln than to a dab rig.

Torch vs Electric Nail for Dabbing at the Perfect Temperature

Depending on your specific dabbing setup, you will either be using a torch or an electric heating element to heat up your nail.

With a torch, you can heat your nail anywhere from 0-1,000+°F (0-538°C). The same holds true for electric nails, or e-nail, which uses an electric coil to heat the dabbing surface – most coils can be set to temperatures ranging from 0-900°F (0-482°C).

The important thing to note with e-nails, in particular, is this: there is a consistent disparity between the temperature setting on the unit and the actual dabbing surface temperature across models. Meaning, although the heating unit is set to 680°F, the dabbing surface may only be 600°F. Click here to see the full study.

Furthermore, not all nail materials (electric or otherwise) are the same – each has different heating and cooling properties. The following properties hold true regardless of whether the nail is heated with a torch or an electric coil.

Titanium*: Boasts a quick heating and high heat retention, but provides the lowest flavor quality of the bunch

Ceramic: While it takes the longest to heat up, ceramic nails are durable, retain heat well, and produce good flavor.

Quartz (depending on thickness): Heats up reasonably quickly, cools down quickly and produces high-quality, delicious vapor.

*Not all titanium nails are safe for dabbing – there is a large variance in titanium quality and purity. Stick to manufacturers who utilize tested type 2 titanium.

As you might have surmised, the actual temperature at which you take your dab is the result of a unique combination of nail material, thickness, and the specific heating element used.

As you might imagine, there are different models of torches and electric units available – the 700°F setting may be too hot on one e-nail but just right on another. That said, a certain level of trial and error has to occur in order to find the perfect temperature for you.

Tips for Perfect Temperature Dabs Using a Torch

Given the manual element of heating a nail with a torch on traditional rigs, our recommendation is to focus on the variables you can control with each dab – how long you heat the nail for and how long you let it cool.

Using a timer during heat up and cool down will help ensure an accurate count with each dab. Try heating the nail for 30 seconds, letting it cool for 20, and then taking your dab. If it’s too hot, let it cool a few extra seconds; if it’s too cool, wait less time before dabbing.

Alternatively, you can use a heat gun to try and get a more accurate temperature reading of the dabbing surface. If you go this route, be aware that there will likely be a range of surface temperatures on the nail depending on which part of the nail the torch was aimed at.

The Perfect Temperature for Dabs on an E-nail

Don’t stress about the specific temperature setting on the heating element – what matters is the temperature of the nail surface. It is not unusual for a quartz e-nail to have a surface temperature that is 100°F lower than the set temperature on the unit.

With this in mind, you have to get to know your e-nail in particular, as your friend’s suggested dabbing temperature may be significantly too hot/cold for you. Most e-nails adjust the temperature in 10°F intervals, so making several small adjustments of 10-20°F at a time can help you find your preferred temperature.

What about vape pens?

The same temperature rules apply when using a vaporizer pen. In fact, many new vaporizer pens have adjustable heat settings for this very reason. On pen-style vapes, the increments by which you can adjust the temperature tend to be more precise, making them ideal for the dab connoisseur. Experiment with different settings to find the perfect temperature for you.

If you’re like us and always take your vaporizer pen on the go, we suggest transporting it in a discreet and protective stash box like a safety case. It has room for your all your stoner kit essentials like a vaporizer pen, dabber, concentrates, and more. Now that TSA released guidelines for how to take your vape pen on a plane, you can travel safely.

When dabbing, a small dose of cannabis concentrate is dropped onto a hot "nail" to vaporize the cannabinoids and terpenes contained within – all the good

Adults only (21+)

This website contains adult material and is only suitable for those 21 years or older. Click Enter only if you are at least 21 years of age.

The Ultimate Dabbing Temperature Guide: Finding the Best Enail Temp

When it comes to choosing cannabis concentrates to use with your enail kit, we won’t be the first to tell you that the options out there are endless: between juicy live resin, pungent shatter, and frosty diamonds, the types of sauce are as unique as they are diverse. There’s an option out there for everyone, and that’s exactly why things can get a bit tricky for dabbers looking to try them all – figuring out how to get the most out of each one is no easy feat!

An often overlooked detail is that what actually makes all the difference between different concentrate types isn’t THC or CBD content, but rather terpene type and content. Terpenes are the flavor and scent molecules found in and extracted from the crystal-like trichomes on cannabis plants and are responsible for creating varying flavor profiles and effects. To get the most out of the terpene profiles and maximize their flavor nuance and complexity, finding the right temperature for dabbing is incredibly important. Not only does the best enail temp fit vary by strain and terpene content, but it’s actually sparked (no pun intended) quite a bit of debate about which works best.

In this blog, we’ll dive into some of the idiosyncrasies and best practices when it comes to finding the best temp for dabs with your MiniNail.

Less Heat + Terpenes = Perfect Dab Temp

Let’s start with an overview: having a basic understanding of how dabbing works will help understand why temperature levels are so important. Concentrates are made by extracting cannabinoids from the plant, and their effects are activated when heated convectively instead of conductively. As explained in Hemper, “convective heating is healthier, smoother, and more effective because it doesn’t ‘burn off’ and waste the essential and active ingredients in the concentrate.” Convective heating also allows you to control the temperatures at which you heat your concentrates – which is why so many frequent dabbers have turned to using an enail instead of the classic, yet dated, torching method.

Different terpenes will be more noticeable at different temperatures, for example:

  • Humulene (435 ° F): Flavors of woody earthiness will act as anti-inflammatory agents and help with appetite suppression and pain.
  • Pinene (420-430 ° F): Sharp and sweet, these flavors of pine are generally helpful with inflammation and asthma.
  • Caryophyllene (390 ° F): Peppery, woody, and spicy, this terpene profile assists with muscle spasms, pain, and insomnia.
  • Linalool (388 ° F): On the fruitier and floral citrusy side, users will experience relief from insomnia, stress, and anxiety.
  • (Limonene 350 ° F): With citrus-heavy notes of lemon and orange, Limonene aids with anxiety and depression.
  • Myrcene (330-334 ° F): Myrcene, with flavors of herbal clove and citrus, helps users with its anti-inflammatory qualities.

Getting the Most Out of Terps: Cold Start Dabs

One of the biggest advantages of using lower temperatures when dabbing is the ability to get the most out of your concentrates. This method is called a cold-start dab, in which users will load their concentrate of choice onto the nail before heating it. This creates an opportunity to better preserve cannabinoids that, in a hotter setting, would actually get burnt off and lost.

Understanding Temperature-Based Effects

It’s important to note that there is such a thing as an enail temperature being either too hot or too cold – so, let’s break down some of the details that come with different temperature levels.

32°F – 310°F (0°C – 154°C) : Usually far too low to actually vaporize the concentrate, these temperatures won’t yield much in terms of clouds and vapor, producing little effect or flavor.

315°F – 450°F (157°C – 232°C) : A perfect place for low-temperature dabbing, this temperature range vaporizes terpene profiles without burning them, allowing for the best possible flavor as originally intended by the extraction process.

450°F – 600°F (232°C – 315°C): In this medium temperature setting, you’ll experience lower flavor profiles but likely higher cloud production.

600°F – 900°F (315°C – 482°C) : Users who dab in this range will see their concentrates combust quickly and produce thick, smoky clouds upon vaporizing. Note that much of the unique flavors will be lost at these temperatures as the terpenes will be more burnt off.

900°F + (482°C +) : We don’t recommend any temperatures in this range – not only do they usually create harsh and burnt hits, but they will actually get to the point of being unsafe as carcinogens and toxins are released in vapor form at these temperatures.

Here at MiniNail, we’re all about making sure that you are having the best dabbing experience time and time again. For more information about tips, tricks, and best practices, make sure to follow us on Instagram! We post new info all the time and would love to share it and connect with you!

Heat level is crucial to the dabbing experience. So what's the best temperature for dabbing cannabis concentrates with an enail? MiniNail is here to answer all of your questions on dabbing temp, including what terpenes are expressed at different temperatures! ]]>