Categories
BLOG

bolt pipe

Bolt pipe clamps

Diameter: 2 in – 4 in

. upper clamp with “captive” bolts, and a lower threaded clamp. The metal seal ring and rubber seals freely slip into the tapered flange end. Sealing is accomplished .

Diameter: 60 mm – 800 mm

PIPE CLAMPS FOR WALL MOUNTING • With EPDM insert, -40°C to +120°C • Silicone insert, -60°C to +170°C, on request • Refer to the beginning of the chapter for installation examples of ceiling mounting

Diameter: 38 mm – 375 mm

The HI-TORQ 80 coupling from Clamp-All® is engineered to be the most cost effective way to join any hubless DWV system in high risk environments and be assured of an easy installation and a trouble-free job.

Diameter: 38 mm – 375 mm

Clamp-All HI-TORQ 125 couplings have the thickest, strongest shield and the highest torque clamps in the industry. Clamp-All HI-TORQ 125 couplings have no equal. In addition to above .

Diameter: 55 mm – 70 mm

NORMACONNECT® SEC ball zone exhaust gas clamps are the ideal solution when it comes to making connections in central and rear exhaust gas areas. When used in conjunction with flange joints, it is possible to swivel silencers .

Bolt pipe clamps Diameter : 2 in – 4 in . upper clamp with “captive” bolts , and a lower threaded clamp . The metal seal ring and rubber seals freely slip into the tapered flange end.

FIG 295 295 Double Bolt Pipe Clamp

Description

Size Range: 3/4″ through 36″

Material: Carbon steel

Finish: Plain or Hot-Dip Galvanized with Zinc Plated Bolts & Nuts

Service: Recommended for suspension of pipe requiring insulation within the limitation of temperature and loads shown below.

Maximum Temperature: Plain 750° F, Galvanized 450° F

Approvals: Complies with Federal Specification A-A-1192A (Type 3), WW-H-171-E (Type 3), ANSI/MSS SP-69 and MSS SP-58 (Type 3).

Installation: Attachment to the clamp may be made with a welded eye rod Fig. 278 or the weldless eye nut Fig. 290.

Features:

  • Sizes 6″ and above accommodate up to 4″ thick insulation.
  • Figure 41SD will accommodate larger insulation thicknesses, loads and dimensions.

Ordering: Specify pipe size, figure number, name and finish.

FIG 295 295 Double Bolt Pipe Clamp Description Size Range: 3/4″ through 36″ Material: Carbon steel Finish: Plain or Hot-Dip Galvanized with Zinc Plated Bolts & Nuts Service: