This Bong is Made Out of Ice!
Achieving a New Chill with Eyce’s Ice Bong: The Perfect Summer Smoking Apparatus
Here at Toke Tank, we’ve smoked out of a lot of different marijuana pieces, from glass to silicone, bubblers to hand pipes, apples to pumpkins – even a pineapple! We’ve even shared about making a piece out of pretty much anything. But this bong made by Eyce is truly majestic because the entire thing is made out of ice.
If you’re hard on pieces like we are, you know the struggles of breaking your favorite pipe. But Eyce’s ice bong allows you to smoke hard, play hard and get extra chill.
After some trial and experimentation, we’ve found pride in creating a truly unique piece that you can recreate over and over. No more time spent cleaning out resin; just melt, rinse and recreate a new bong!
A Bong Made of Ice: Eyce Mold 2.0
Ease of Use: Difficult but worth it. Follow the included instructions carefully and have patience; it is an artwork after all. After an initial struggle involving many broken bong attempts, we found it easier to get the ice bong out of the mold if you thaw it a little longer than the instructions mentions. You can place the bong back on the freezer after it is out of the mold to achieve perfection.
How To Make The Ice Bong:
- Rinse all the parts in water, turn the mold upside down and drop the mouth piece with the teeth facing up into the bottom of the mold.
- Pinch the mold together to hold the inside core straight. Then, insert the core pin through the outside core hole and then into the inside core hole, making sure the inside core stays straight (this will be the chamber of your bong).
- Insert the stand into the opening of the mold. We found that inserting the stand in too deep can make it hard to pull the ice bong out the mold which may lead to breakage.
- You are now ready to fill the mold with water. Poor water through the hole in the stand until it overflows (you want it to be completely full).
- Tap out the bubbles and then insert the plug, creating a water tight seal.
- Place the water-filled mold in your freezer as up right as possible.
- Freeze for at least 12 hours.
- Rinse with hot water. Make sure to rinse the middle with water but make sure to have the core pin in when you do.
- Alternate between rinsing with hot water and letting it sit out on the counter for a while until you can slide the core pin and stand (with bong attached) out.
- Stretch and slide the grommet on with the down stem into the hole.
- Load it up and enjoy!
- Refreeze for a later use and pat yourself on the back for creating something truly beautiful!
Hardware: The mold includes: Eyce mold, core pin, down stem, plug, mouth piece, grommet, and stand. Just add water!
Durability: Extreme. Just recreate your ice bong anytime it breaks…Or you know, melts. The mold is made out of tough silicone which will last a lifetime.
The fact that the Eyce Bong is made out of ice ensures that your smoke stays as cool as it can be, providing you with a smooth fresh hit every time. Check it out here!
Achieving a New Chill with Eyce’s Ice Bong: The Perfect Summer Smoking Apparatus Here at Toke Tank, we’ve smoked out of a lot of different marijuana pieces, from glass to silicone, bubblers to hand pipes, apples to pumpkins – even a pineapple! We’ve even shared about making a piece out of pretty much anything. But…
EYCE ICE BONG
Looking for the coolest bong ever? Okay, but how cool? Like, cold as ice?? Then look no further, friend, cause you just found it: an actual bong made of ice! And nothing’s colder than ice.
Well, something is, but you can’t smoke out of it. So check out the Eyce 2.0 Water Pipe made of ice!
Technically it’s not a water pipe…yet. It’s an ice mold, plus a few key pieces of hardware, that allow you to make your own water pipe out of ice.
The innovative Eyce 2.0 is a silicone mold that creates an awesome water pipe made out of ice that not only looks dope, but has amazing functionality, dropping the temperature of inhaled smoke down to a super cool 26°F. It’s the perfect summertime treat, and great for comfy comfy hits year-round.
The Eyce 2.0 kit comes with all the parts you need to easily assemble a frozen water pipe masterpiece. It’s made from 100% safe, FDA-approved food-grade silicone. And you can use it over and over again for never-ending smokey cold fun.
It’s also neat as heck! Imagine busting out a bong made of solid ice at your next party or bbq. Or freeze ahead of time and bring it to a friends place in a cooler. It makes for a very impressive reveal. “Ice bong bitches. ” –future you
The amazing Eyce 2.0 is a silicone mold that creates a water pipe out of ice that not only looks dope, but has incredible functionality, dropping the temperature of inhaled smoke down to a super cool 26°F. It's the perfect summertime treat, and great for comfy comfy hits year-round.