Categories
BLOG

dr.dabber boost instructions

Boost: Black Edition User Manual

Use sensibly. Dr. Dabber products are intended for use by persons of legal smoking age. These products are not suitable for children, women who are pregnant or breastfeeding, or persons with heart disease, high blood pressure, hypertension or diabetes. These products should not be used in conjunction with medication for depression or asthma. Discontinue use and consult a physician immediately if you experience symptoms such as nausea, vomiting, dizziness, diarrhea, weakness, rapid heartbeat or hypertension.

Boost: Black Edition eRig
Glass Water Attachment
XL Domeless Titanium Nail (Threaded)
XL Ceramic Nail (Threaded)
XL Quartz Nail (Threaded)
Magnetic Carb Cap
Magnetic Loading Tool
Medical Grade Silicone Storage Container x2
Micro USB Charging Cable
Limited Edition Dr. Dabber Keychain

Register your Dr. Dabber product today to activate your warranty and receive helpful tips. This unit is under a one year Warranty on electronic components & battery. Visit DrDabber.com/Register to get started!

1. Use with caution. Must be 21 years of age or older to operate.
2. The nail becomes extremely hot. Do not touch once powered on.
3. Do not expose the device to direct sunlight.
4. Do not attempt to use the device without the glass attachment in place.
5. Do not attempt to place the device down on a surface without the base. The base is included to ensure proper weight distribution and to avoid damage to the glass attachment.
6. When the battery is low, indicator light will flash.
7. The light on the power button will flash 3 times to indicate a connection issue.
8. Charging: Charge device fully before use. The power button shows a purple light when the device is being charged.
9. Titanium Nail: Press the power button 3 times to heat titanium nail. The unit will begin with white light and change to blue light after 25 seconds indicating it is ready to use (nail will continue heating for 20 seconds before cutoff) • Temperature reaches 515°F after 25 seconds • Temperature reaches 610°F after 45 seconds
10. Ceramic/Quartz Nail: Press the power button 5 times to heat ceramic/quartz nail. The unit will begin with blue light and change to white light after 40 seconds indicating it is ready to use (nail will continue heating for 20 seconds before cutoff) • Temperature reaches 520°F after 40 seconds • Temperature reaches 600°F after 60 seconds
11. Do not heat the device more than 3 cycles continuously to avoid bodily harm or injury.
12. Do not use or charge in a motor vehicle.

HOW TO USE YOUR BOOST

1. Remove glass from unit and load from the top with water.
2. Click button to turn device on
-3 times for titanium nail
-5 times for ceramic/quartz nail
3. Load product on tip of tool
4. Once light changes color (Approx 30 seconds), touch tip of the tool to nail and begin to inhale through glass mouthpiece.
5. Once all product has melted off of tool, flip tool around and place carb cap on top of the nail to increase vapor density. (Generally 3-4 seconds)

CLEANING YOUR GLASS ATTACHMENT

To clean glass attachment, first remove the glass attachment from the eRig, then slowly pour 91% isopropyl alcohol, or higher, into the mouthpiece until the unit is about 1/4 full. Shake the attachment gently until clean. To rinse out the alcohol, pour water into the top (mouthpiece) until all alcohol is flushed out of the bottom of the attachment. To remove all water from device, blow through mouthpiece and shake gently.

SWAPPING OUT YOUR NAIL

WARNING: DO NOT ATTEMPT TO REMOVE NAIL WHEN HOT. REMOVE NAIL CAREFULLY WITHOUT BENDING OR TWISTING THE CERAMIC ELEMENT.

1.Turn nail clockwise to secure nail.

2.Turn nail counter clockwise to remove nail.

SWAPPING OUT YOUR CERAMIC ROD

WARNING: DO NOT ATTEMPT TO REMOVE CERAMIC ELEMENT WHEN HOT.

1.Pull up vertically on ceramic element to remove.

2.Push down on ceramic element to secure gold pins in place.

CHARGING YOUR DR. DABBER BOOST: BLACK

USB Port Connects to universal USB outlets.

Connecting Adapter Charge device fully before use. The power button shows a purple light when the device is being charged. Light will turn green when fully charged. Due to the size of the battery, it is recommended to charge 6-8 hours or use an AC adapter (Not Included) to speed up charging time.

Support Line 1(855) 362-3227 Support Email: [email protected]

For helpful tips and trick as well as all the latest accessories, head over to www.drdabber.com

Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Safety Information Use sensibly. Dr. Dabber products are intended for use by persons of legal smoking age. These products are not suitable for children, women w

Dr.dabber boost instructions

No Products in the Cart

title

  • details
  • Sign In
  • Register
  • View Cart
  • Home
  • Boost Support

Swapping your Boost Nail
Unscrew Nail: Turn counterclockwise to unscrew nail, then lift nail to remove.
Lower nail and rotate clockwise to screw nail onto eRIG™.
*WARNING: DO NOT ATTEMPT TO REMOVE NAIL WHEN HOT. DO NOT TOUCH CERAMIC ROD AS IT MAY DAMAGE HEATING ELEMENT.

Boost Glass Removal
Between your index finger and your thumb, firmly hold the base of the glass unit AS WELL AS the glass ring that attaches to the device, then push down with caution until the attachment is flush with the lip of the Boost unit.

Do not hold from base alone (water chamber) as the joint may break when attaching the glass. Remove glass with a straight up and down motion. Try not to twist. Hold the glass attachment by the connection port.

Cleaning your Glass attachment
To clean glass attachment, first remove the glass attachment from the eRig, then slowly pour 99% isopropyl alcohol into the mouthpiece until the unit is about 1/4 full.

Shake the attachment gently until clean. To rinse out the alcohol, pour water into the top (mouthpiece) until all alcohol is flushed out of the bottom of the attachment.

To remove all water from device, blow through mouthpiece and shake gently.

Charging your boost
Insert the Micro USB charger into the side of the Boost, then insert the other side of the charger into a USB port or AC adapter.

The power button shows a purple light when the device is being charged. A green light indicates charging is complete. Due to the size of the battery, it is recommended to charge 6-8 hours or overnight on an AC adapter to charge fully.

Try to remove the charging cord as soon as the unit is fully charged, as the cord will not stop the trickle down effect, meaning it will slowly start to lose power over time after a full charge, while plugged in. You can always just unplug and plug the unit back in to check if it needs a few more minutes for a full charge.

Please, be advised our charger for the Boost will charge the battery to about 20 to 30 cycles. If you use an external 18650 battery charger, you will get an approximately 50 cycles. This happens for all USB chargers. They do not put out enough amps to get the battery to its full performance. We use these chargers for the convenience it provides with today’s technology.

How to use your Boost
1. Load Water (Remove glass before loading)
2. Click button * 3 times for titanium nail * 5 times for ceramic nail
3. Load product on tip of tool
4. Touch tip of the tool to nail once light changes color, then begin to inhale through glass mouthpiece.
5. Once all product has melted off of tool, flip tool around and place carb cap on top of the nail to increase vapor density.(Generally 3-4 seconds)

Is there a warranty on my boost
Unfortunately, we no longer carry or cover this model of Boost unit under our warranty. Check out our new model, the Boost: Black Edition.

Swapping your Boost Nail Unscrew Nail: Turn counterclockwise to unscrew nail, then lift nail to remove. Lower nail and rotate clockwise to screw nail onto eRIG™. *WARNING: DO NOT ATTEMPT TO REMOVE NAIL WHEN HOT. DO NOT TOUCH CERAMIC ROD AS IT MAY DAMAGE HEATING ELEMENT. Boost Glass Removal Between your index finger a