How To Roll a Backwoods Blunt
You’re here because you love blunts. who doesn’t?! The pairing of ganja and tobacco goes back centuries — the two complement each other so well with an intense but euphoric buzz. Blunts are one of my favorite ways to medicate and there’s nothing quite like a perfectly rolled backwood.
Backwoods can be intimidating because they are the ‘rawest’ blunt wrap on the market — the wrap is straight dried tobacco leaf rather than processed tobacco pulp. This makes them exponentially more fragile than other blunt wraps like Swishers or Zig Zag wraps. One wrong move and you could be left in a crumbly mess of tobacco leaf. But fear not! Rolling a backwood can be just as simple as any other blunt or joint, it just takes a little finesse.
Backwoods come in a variety of flavors — honey, honey-berry, wild rum, black n’ sweet, grape, just to name a few. For this tutorial, we decided to roll up some Mochi from TKO Reserve in a delectable honey-berry backwood — a perfect combination to satisfy our sweet tooth.
Step 1 — Break weed up by hand
Time to grab your jar and pick out some choice buds! Break down those sweet, sticky nugs by hand (as opposed to a grinder) for a smoother smoke. On average, about 1.5-2 grams will fit in a backwood blunt, but since they are just raw tobacco leaves, the size of the leaf varies per package.
Step 2 — Find the edge of the wrap
Find the edge of the leaf (left image) and track it down to the tip of the cigar (right image). This will ensure a clean unravel.
Step 3 — Gently peel until loose then carefully unravel and remove tobacco innards
Once you’ve followed the edge of the leaf to the end of the cigar, gently begin to peel the leaf away from the cigar. We’re trying to fill this backwood with something much more delicious, so once you’ve unraveled the tobacco leaf, gut the insides into an ashtray.
Step 4 — Place broken buds in wrap to the desired fill
Unlike other blunt wraps, every backwood leaf is unique in shape. This can make it a little more difficult to fill because it doesn’t have a natural pocket for your ganja. Now that your weed is all broken down, find the center point down the leaf and lay out your herb in a line down the wrap.
Step 5 — Tuck one side of the edge around weed until secure
Get ready to tuck. Hold the blunt between your index/middle fingers and your thumb.
Step 6 — Roll leaf up entirely over the weed, tucking it in along the way
Gently roll the leaf edge closest to you up and over the weed, tucking it into the other side while gently applying pressure with your thumb to make the blunt tighter.
Step 7 — Gently apply pressure and complete the roll
This is the trickiest part, but it’s just like rolling a joint; once you have it down it becomes muscle memory. Don’t worry if some weed falls out, you can always use it to top off the blunt once it’s rolled.
Step 8 — Generously lick edge then press down tightly to seal
Once the blunt is tightly tucked and rolled, it’s time to seal that ish. Since the tobacco leaf is uneven, there will be a leftover tail that will help seal the blunt wrap. Generously lick that extra bit of leaf and wrap it around the blunt, using your lips to push down and seal the leaf tightly.
And just like that. you have a beautiful backwood blunt!
How To Roll a Backwoods Blunt You’re here because you love blunts. who doesn’t?! The pairing of ganja and tobacco goes back centuries — the two complement each other so well with an intense but
How to roll a blunt
Copy article link to clipboard.
Link copied to clipboard.
- What is a blunt?
- What you need to roll a blunt
- Step-by-step instructions for rolling a blunt
- Why people like blunts
- Why people hate blunts
- Bottom line
What is a blunt?
A blunt is similar to a joint, in that it is essentially a marijuana cigarette. But unlike joints, the defining feature of a blunt is that it is wrapped in a tobacco leaf paper, rather than a standard rolling paper. This feature provides many of the distinctive qualities of a blunt, including taste, smell, effect, and burn time.
The defining feature of a blunt is that it is wrapped in a tobacco leaf paper. Photo by: Gina Coleman/Weedmaps
Within the cannabis community, blunts can be a bit polarizing. Some smokers are avid fans of blunts, essentially smoking nothing else, while others are turned off by the sometimes strong smells and tastes associated with the tobacco leaf wrap. Learning how to roll a perfect blunt takes practice, so if at first you don’t succeed, keep trying!
What you need to roll a blunt
To roll and smoke blunts like a pro you will need a handful of key components. Obviously, you will need your cannabis strain of choice. Since you’ll have to grind your bud before rolling your blunt, it is best to also have a reliable grinder. To keep your work space tidy, a rolling tray will also come in handy.
To roll and smoke blunts like a pro you will need a handful of key components. Photo by: Gina Coleman/Weedmaps
Additionally, you will need rolling papers. Rolling papers are the most important element of a blunt, since the tobacco leaf wrap is the very definition of what makes a blunt a blunt. Selecting the right tobacco wrap is at the heart of rolling blunts, as blunt aficionados tend to be very loyal to one particular brand of tobacco wrapping paper, using their brand of choice almost exclusively.
There are two main ways to procure your tobacco wrapping paper. Traditionally, you purchase a pre-rolled cigar or cigarillo, empty out the contents, and then repurpose the tobacco wrapping paper by filling it with weed before re-rolling it into a blunt. Popular cigar and cigarillo brands include:
- Swisher Sweets
- Dutch Masters
- White Owl
The other type of blunt wrap is a tobacco leaf paper that comes as-is and is not a pre-filled cigar or cigarillo. Zig Zag Blunt Wraps are probably the most common wrap in this category.
Step-by-step instructions for rolling a blunt
Step 1: Grind your weed
Before you start rolling your blunt, it’s a good idea to complete a little prep work. Most importantly, that means having your weed ground up and ready to go. That way when you’ve broken down and cleaned out your wrap, you can move right into rolling your ground cannabis.
The best way to grind your weed is with a grinder. This tool gives you the most consistent grind, which translates into a smoother, more even burn. If you don’t have a grinder, carefully break apart your weed with your fingers. Shoot for picking it apart into small pieces that are more or less the same size. As you go, be as delicate as you can to minimize damage to the cannabinoid-rich trichomes.
Before you start rolling your blunt, grind your weed with a grinder. Photo by: Gina Coleman/Weedmaps
Step 2: Select your wrap
As mentioned above, die-hard blunt smokers tend to define themselves by their wrap of choice. If you’re new to blunts, experiment with a handful of different brands. You might even want to test a flavored wrap. Enjoy figuring out which blunt wrap you like the best. Or, if you like a couple of different brands, feel free to switch things up according to how you’re feeling at the moment.
Step 3: Break down the wrap
The cleanest and most precise way to break down the wrap is to use a razor blade to split the cigar or cigarillo lengthwise down the middle. You can also use your hands; just be very careful that you break apart the wrapper without tearing it all the way through or cracking it. Once you’ve opened the cigar or cigarillo, simply empty out and discard the tobacco inside the wrap.
Once you’ve opened the cigar or cigarillo, simply empty out and discard the tobacco inside the wrap. Photo by: Gina Coleman/Weedmaps
Step 4: Moisten the wrap
It’s a good idea to get the wrap slightly moist, as this makes the tobacco leaf more pliable and easier to work with. You can use either water or saliva for this. Some folks lick the blunt wrap while others use a paintbrush moistened with water. Whatever you do, don’t get it sopping wet — you don’t want the entire thing to disintegrate. Just moisten the wrap enough to make it easier to handle.
Step 5: Place weed in wrap
Hold the tobacco wrap in one hand, typically your non-dominant hand. Position your index fingers and thumbs in such a way that you form the wrap into a U-shaped trough. Now, grab a pinch of your ground-up marijuana and place it inside the tobacco wrap, forming a line that runs the full length of the wrap. Be sure you don’t overfill it—you still need enough space to wrap the tobacco leaf into a cylinder that completely encases the marijuana.
Grab a pinch of your ground-up marijuana and place it inside the tobacco wrap, forming a line that runs the full length of the wrap. Photo by: Gina Coleman/Weedmaps
Step 6: Roll up your blunt
Use both hands to gently rock the wrapping paper back and forth. As you engage in this motion, you should be tamping down and evening out the marijuana. This technique will begin to shape your blunt into a cylinder that is uniform in thickness. When you’ve got the right shape formed, bring one edge of the wrap up and over the marijuana, and tuck it underneath the opposite side of the wrap. At this point, the wrap should completely encase the marijuana.
As you gently rock the wrapping paper back and forth, you should be tamping down and evening out the marijuana. Photo by: Gina Coleman/Weedmaps
Step 7: Seal your blunt
Hold the edge of the wrap that is now on top of the other edge and use your tongue to dampen it. Lick the inside of the wrap and, when it’s moist, press it down on top of the other edge of the wrap. The moisture should make the tobacco stick to itself, thereby sealing the blunt shut. Be sure that the seam you just made is sealed along the entire length of the blunt.
Lick the inside of the wrap and, when it’s moist, press it down on top of the other edge of the wrap. Photo by: Gina Coleman/Weedmaps
Finally, use a lighter and run the flame up and down along the seam. This dries out the tobacco and locks the seam into place so the blunt doesn’t fall apart when you’re smoking it.
Finally, use a lighter and run the flame up and down along the seam. Photo by: Gina Coleman/Weedmaps
Step 8: Light up your blunt and enjoy
Now it’s time to light up one end of your blunt and pull the smoke through the other end. Enjoy!
Now it’s time to light up one end of your blunt and pull the smoke through the other end. Photo by: Gina Coleman/Weedmaps
Why people like blunts
Many marijuana consumers have strong feelings about blunts. Those who love blunts tend to really love them. There are a handful of reasons why blunt lovers prefer this method of smoking above other methods:
- Taste and smell – Many blunt fans enjoy the added tastes and smells that come from the tobacco leaf wrap. Aficionados often like mixing and matching wraps with different strains. Some blunt smokers also like experimenting with flavored blunt wrappers, introducing even more complexity to the taste and scent profiles of their smoking experience.
- Slow burn – Blunts tend to burn a bit longer than standard joints, giving smokers an experience more akin to slowly puffing on a cigar or cigarillo.
- Versatility – Compared to other, less mobile smoking methods, such as a bong or dabbing, blunts are incredibly versatile. You can easily and quickly roll one up anytime and anywhere, and they’re equally effective for solo and social smoking.
- Effects – The tobacco leaf wrap introduces a new and often heightened sensation of feeling high. In fact, it’s fairly common for first-time blunt smokers to feel a bit overwhelmed by the combined tobacco-plus-cannabis buzz. But this is precisely the effect that many blunt fans want.
Why people hate blunts
Interestingly, the reasons some people love blunts are also the reasons other people hate blunts. Specifically, people who hate blunts tend to be turned off by:
- The smell and taste of the tobacco wrap.
- The sometimes harsh smoke produced by the tobacco wrap.
- The additional “buzzy” effects typically produced by inhaling smoke from the tobacco wrap.
Blunts are excellent choices for cannabis connoisseurs who favor strong aromas and flavors accompanied by a slow burn and intense high.
How to roll a blunt Copy article link to clipboard. Link copied to clipboard. Contents What is a blunt? What you need to roll a blunt Step-by-step instructions for rolling