Categories
BLOG

how to roll a philly blunt

Blunt a Day – Just b/c I am that stoned

Howdy y’all my name is Mary Jane, and I love to smoke blunts. I smoke them every day, after a long hard day of work, or when my favorite TV show comes on, I always have a blunt ready to go.

Monday, November 24, 2008

How to Roll a Philly Blunt

How to Roll a Philly Blunt:

First you gotta buy a Philly Blunt Cigar at your local Gas Station or 7-11

Second unroll the plastic wrapper and lightly moisten the entire outside of the cigar with your saliva by licking the cigar. Then split it down in a middle line, by applying excessive amounts of pressure EVENLY on each side of the cigar, so it splits right down the middle , perfect.

Now that you have it split, IMMEDIATELY lick the sides of the Philly so that the outer leaf DOES NOT SEPARATE from the inner cigar leafs. So that it ends up looking like the image below:

Then break up the buds and toss it in and roll it up by pressing down on the buds while flattening the top and licking the top side of the cigar seal it closed with your tongue, and make sure none of that sticky icky falls out, ya digg.

Then you seal it closed and you got this:

That’s it y’all that’s how you roll up a philly blunt!!

Figured I would post this since the audience demands it, haha, if you all want anything else posted up on this blog, leave some comments.

Blunt a Day – Just b/c I am that stoned Howdy y’all my name is Mary Jane, and I love to smoke blunts. I smoke them every day, after a long hard day of work, or when my favorite TV show comes

7 Steps To Rolling A Perfect Blunt

Published : Jun 7, 2018
Categories : Other subjects

A blunt is a cannabis cigar that’s normally made with the wrapper of a cigar or cigarillo. However, not everyone knows how to roll a proper blunt! In our guide, we show you the steps to rolling a perfect, no-nonsense blunt.

For those who don’t know, a blunt is a cannabis cigar. It is usually made from a cigar or a cigarillo that has been emptied of its tobacco and then re-rolled with ground cannabis. The name “blunt” comes from Phillies Blunt brand cigars that, at one time, were sold simply as blunts. Since the 1980s, “blunt” has widely come to mean “marijuana cigar”. Some companies also sell blunt wraps, which are cigar wraps that come without tobacco, so you can skip an entire step.

Just like rolling a nice joint, rolling a perfect blunt is an art that first needs to be learned. But don’t despair! Even if you have never rolled one before, with our guide and some practice, you will be able to craft a proper blunt in no time!

HERE IS WHAT YOU NEED TO ROLL A PERFECT BLUNT

• Cannabis strain of your choice
• Cigar, cigarillo, or blunt wrap
• Grinder (optional, but will greatly help)
• Small sharp knife (optional as well)
• Lighter

HOW TO ROLL A NICE BLUNT IN 7 STEPS

STEP 1: GRIND UP YOUR WEED

Using your grinder, grind up your cannabis. The finer and more uniform you grind your weed, the more even it will burn for a nice and smooth draw. Alternatively, you can use the traditional method and break up your weed with just your hands, which will make your blunt burn slower.

STEP 2: PREP THE BLUNT WRAP

Unless you got an empty blunt wrap without tobacco, you will need to isolate the outer wrapper from a cigar or a cigarillo. For this, you need to first cut open the wrap. Take the sharp knife and carefully slice open the wrap lengthwise. Once it is all the way split down the middle, empty out the tobacco. (Some more-experienced blunt rollers don’t even use a knife to cut open the wrap: If you’re careful, you can also use your fingers to crack open a cigar).

STEP 3: MOISTEN THE WRAP

The blunt wrap may be a little brittle and could even have some cracks and tears. To make the blunt easier to roll and seal up, you can moisten the wrapper. The best way to do this is to slightly wet your fingers using a bowl of water. You can also use saliva for this, although this is probably not the most hygienic way to do it, especially if you’re gonna share it later on.

STEP 4: FILL THE BLUNT WRAPPER WITH YOUR CANNABIS

Now it’s time to fill the blunt wrap with your ground weed. If you use a smaller, cigarillo-sized wrapper, one to two grams of cannabis will be all that you need. If your wrap is bigger, such as if you use the wrapper from a cigar or a ready-made blunt wrapper, you may need more cannabis to fill your blunt.

STEP 5: ROLL YOUR BLUNT WRAPPER

To get your blunt nice and even all the way, roll the wrapper between your fingers when you pack your blunt. Be careful and make sure that you don’t crack the wrapper, especially if it’s still dry. Once your blunt is readily packed and has a nice shape, tuck the wrap under and wet the insides of the exposed edges from end to end. If there are still wrinkles and other uneven spots, use your fingers to smooth them out. Should there be any cracks or holes in your blunt, you should be able to fix them with the adhesive from rolling papers.

STEP 6: DRY THE BLUNT

When you have rolled your blunt into a nice shape, you want to dry it so it stays together. Drying your blunt will also make for a better and more even burn. Take the lighter and run it a few times lengthwise across the blunt, especially near the seams. Make sure you don’t run the flame too close to the blunt for too long—you don’t want to burn it!

Learn how you can roll the perfect blunt with our step-by-step blunt rolling guide! It's a lot easier than you might think! ]]>