How to roll a joint with hash
Here at Cannabis Wiki, we have covered all different types of joint rolls from the plumber’s joint to the windmill, and of course, the ever-popular rainbow blunt that had consumer raving all of last year, but until now we had not touched one of the cannabis plants most wildly popular products on the market which is hash.
Hash is a delightful marijuana concentrate that can contain anywhere from 40%-80% THC, making it one of the most potent and pure cannabis products out there, but a lot of consumers who don’t rely on a vaporizer have no idea how to use it. Luckily, we’ve got you covered, as with several years of experience, we have learned more than a few things about this incredibly popular product, including all the best ways that you can roll it up to smoke with regular everyday rolling papers.
Can you roll a joint with pure hash?
To answer this question, technically, you could, but the end result would be a roll that wouldn’t burn very well, leaving hot falling coals and ashes in its wake, wasting most of the product and placing anything within an arm’s reach at risk of getting burnt. Instead, it is highly recommended that you combine the hash with some other slow-burning alternative that can help the hash to slowly smolder away without harming you or any of your surroundings and avoiding any unnecessary waste.
How to roll a joint with hash
If you want to enjoy a potent hash joint, then there are a few things that you should know before you start.
Putting a giant tube of a chunk of hash into a rolling paper, even with a mixing material, is a recipe for disaster. Instead, you should break the hash into tiny chunks, as small as they can get, which will help to ensure a smooth and even burn, which do not require constant lighting.
Cone rolling papers are not very compatible with hash, which tends to weigh more than the dry leaves it gets mixed with, so it’s a good idea to use regular flat rolling papers for a hash joint.
The ratio of hash to dry plant materials is important, and the thick marijuana concentrate should never make up more than 50% of a joint filling. The ideal amount is closer to 30-40%, which leaves a cushy barrier of safety when using softer hashes that burn slowly compared to dry products.
What to mix hash with for the perfect joint
Those who need easy step by step instructions on how to roll a joint should check out our guide that is perfect for helping consumers from all experience levels to master the art of the perfect cannabis roll. However, if you are already confident in your twisting abilities, then you might just be ready to pick out the perfect mixing agent.
There are several options available on the market today, but only a few that are recommended for use with cannabis, as the aroma and flavor of the joint will be significantly influenced by whatever you put inside it. Below, you will find the top 3 options to mix with hash and the pros and cons of each one.
1. Cannabis buds
Hash is a concentrated product made from the oils and plant materials from a marijuana plant, so it makes sense that this is the most preferred option out there, but it is also the most expensive. So, if you can afford it, the flavor and smooth smoke from this mixture are by far one of the best mixing agents for a hash joint.
2. Cannabis leaves
The leaves of a marijuana plant don’t contain much for the psychoactive cannabinoid THC, so they don’t pack the same powerful punch as pure buds, but they do mimic the taste quite well. Pot leaves can help to stretch out hash for anyone on a tight budget, and they also offer a smooth hit that is only slightly harsher than cannabis flowers.
It is not uncommon to find cannabis products that include tobacco, and blunt rolls are a perfect example of that, but this mixing option is mostly accepted by cigarette smokers who enjoy the flavor of a filter-less smoke, but some consumers like the combination as it can help to enhance the effects, and get rid of any cigarette cravings at the same time. Tobacco is the cheapest mix for a hash joint, but the taste is one that is overruled by the tobacco leaves, so it isn’t ideal for everyone.
How to roll a joint or spliff that is slower burning, and longer lasting
Whether you are frequently on the go, or simply cannot afford to be continually replacing broken pieces, a cannabis joint will hold up better.
How to roll a joint with hash Here at Cannabis Wiki, we have covered all different types of joint rolls from the plumber’s joint to the windmill, and of course, the ever-popular rainbow blunt
How to Roll a Hash Joint in 3 simple steps!
For many, smoking hash is one of life’s great pleasures. The high is often mellower and it makes for a great daytime or practical smoke. However, the process of actually smoking it in a joint is quite a bit different than it is with buds.
If you’re looking down at a tasty brown block of hash or a squidgy blob of charas and have no idea where to start using it, WeedRepublic has you covered!
This ‘How to Roll a Hash Joint’ guide will give you all the information you need to make the perfect hash joint. We cover:
- How to prepare your hash for a joint.
- Making a roach.
- Choosing which rolling papers to use.
- How to load your rolling papers with your smoking mix.
- How to actually roll an amazing hash joint!
Armed with our tips, you’ll be rolling like Snoop in no time!
Thanks to @chasin.flaves for sharing this beautiful shot on ig.
Roll a Hash Joint: Sort Your Stash
The first thing that’s important to learn about making a hash joint is that hash doesn’t burn very well. If you were to try and use only hash in your joint, it would burn hot, harsh, uneven, and probably go out after every puff. That’s not ideal!
Most people mix their hashish with something that burns a little more evenly. That might be cannabis buds or even tobacco. By including tobacco or dried and ground buds, a hash joint will not only smoke better but it will be easier to roll too.
You’re going to want to process your block of the hash in some way to make it easier to blend with the bud or tobacco. Don’t worry though, this isn’t particularly difficult, but the method you use will depend on the type of hash you have.
Types of Hash
There are two main types of hash and each needs a different method to get it ready for smoking in a joint. They are known as squidgy hash (charas) and brick hash. Some hash probably falls somewhere in between the two as well.
Squidgy Hash (or Charas)
Squidgy hash is the name given to weed extracts taken from live plants. It’s usually from North India or Nepal, where the locals call it charas. The hash makers there will grab the living plants and rub the buds between their hands until the trichomes (crystals) that get you high get left behind as a dark brown or black sticky paste on their palms. This is collected and formed into balls ready for sale.
The best way to prepare this variety of hash for use in a joint is to break a bit off your main piece (it will be very soft and malleable) and roll it into a long, thin sausage shape. Make a few of these ready for your hash joint (depending on how strong you want it to be).
Charas as shown in this image from Weed Supermarket.
Brick hash is commonly made from dry cannabis plants. It’s usually from places like Morocco. When trichomes dry with the plant itself, they become brittle and break off. Hash makers will collect this as fine dust and compress it into firm blocks. These might be crumbly or pretty solid.
If your hash is crumbly, you can just break it down with your fingers into small pieces before mixing it with your tobacco or ground buds. On the other hand, if your hash is a solid piece, you’re going to want to heat it to make it more workable.
Heating hash is best done with a regular old cigarette lighter. The idea is to apply gentle heat, causing the particles to expand so that you can crumble it into pieces small enough to use in a joint. Avoid using a windproof lighter. They might be ideal for lighting the joint in any conditions but it’ll incinerate all of the good stuff from your hash.
You’re basically heating it so that it becomes easier to break up, not to burn it. If your hash turns black or to ash when heating, it got too hot. You’ll have burned off some of its THC content, making for a less potent smoke.
Once you’ve given your brick hash the once over with a lighter, you can pinch a bit off the block and crumble it between your fingers. Go for as fine as possible but you don’t need to work it into an actual powder. When you’re done, it’s ready to be mixed with your tobacco or ground weed buds.
Image Source: Cannabis Wiki
Choose Your Papers
There are all kinds of rolling papers these days. There are long ones like Rowll, short ones like RAW, and even papers that aren’t even made out of paper at all!
To help you understand the different rolling papers, we’ve explained some of the distinctions between the kinds of products out there below:
Raw’s King Sized Rolling Kit comes with two packs of papers, a carrying case, filter papers, and a lighter, so you are ready to go!
They’re the leaders in all things rolling for a reason – RAW. Completely natural, these papers guarantee a smooth, even burn every time you light up.
You can get papers in a baffling array of sizes these days. The smallest are about 2” and the largest can be 12” or more. If you’ve never rolled a cigarette or a joint of any kind before, we recommend some smaller papers to begin with.
Once you get good at making small joints, the skills transfer pretty easily to making bigger ones. That said, many veteran smokers struggle to roll a joint out of the very biggest papers on the market!
Most rolling papers are made, well, of paper! However, when it comes to that paper, there is actually quite a lot of variation.
Rolling papers come in a range of thicknesses. Generally, connoisseur smokers like to smoke with the thinnest paper possible. Products like OCB’s Slim Fit papers are popular.
However, novice smokers will likely find these thinner papers harder to roll with at first. They tend to be less grippy on the fingers and inexperienced hands can struggle with their relative lack of rigidity.
Other manufacturers make their products in a more “natural” way. Untreated, hemp-based products, like RAW and Pure Hemp, are becoming increasingly popular these days. Lacking some of the nasty chemicals of bleached products, they’re an obvious choice for many.
Finally, there are rolling papers that aren’t even made out of paper at all. Products like cellulose papers from Clear are made entirely from plant cellulose and make for some funky looking joints. We don’t recommend these for newbie rollers though, they’re not the easiest to work with!
For the expert rollers out there, these Slim Fit papers from OCB are a must have. Light up more plant material and less paper!
Know exactly what you’re inhaling with these Extra Wide Pure Hemp papers.
Make Your Roach
Next, you’re going to want to make a roach. This is the part of the joint that you inhale from and hold. It stops you from burning your fingers as the joint gets near the end. It also stops any of the ingredients from it ending up in your mouth.
A roach is typically made out of cardboard. Any cardboard will do and many people use the cardboard that their rolling papers are packaged in. The problem with that is you can never make enough roaches for the number of papers in the pack.
Crafty rolling paper companies solved this problem by creating designated roach books are always part of any serious smoker’s kit these days. They’re basically just books of pieces of card that are appropriately sized to make a roach out of.
To make a simple roach you want to take your piece of card (around 2cm x 5cm but let’s not get too technical) and roll it into the cylinder. It’s good to roll it as tight as possible because it will definitely expand when you’re rolling your joint. If when rolled into a tight cylinder, you think the roach feels a bit too chunky for your preference, you can unroll it, shorten the card by ripping a small piece off and roll it up again. Voila! A roach.
You’ve put all that work into rolling the perfect hash joint. Now make sure you get to enjoy it down to its very, very end!
This adorable Narwhal Roach Clip will be there to keep you company while you do it!
Load Your Paper
The next step to rolling your first hash joint is to start packing your paper. There are different approaches you can take here depending on the hash you’re smoking. The idea is to surround the hash with whatever you’re using to help it burn (tobacco or bud).
First, lay your paper on a smooth, clean surface in front of you. You want the gum (a sticky line across the top of the paper) away from you but sticky side up.
If you’re using some form of crumbly hash, the best way to ensure an even smoke is to mix all your ingredients together before rolling. Just mix your crumbled hash and your tobacco or ground weed together on a surface with your fingers and sweep it into either your hand to load the paper, or directly into the rolling paper.
If you’re smoking a squidgy type of hash and you’ve rolled it into long pieces, the mixing method isn’t going to work for you. You’re going to want to layer the hash into the joint instead.
- Put a small amount of tobacco or ground up bud in the bottom of the paper and spread it out along its length.
- Add one or more “worms” (depending on personal tolerance and the occasion). You want to make sure you get a bit of hash in every drag so trim them to cover the length if you need to.
- Add some more tobacco or ground up buds to completely cover the hash “worms”.
Distribution of the materials is crucial to making a good joint. The way you lay everything out will have a big impact on the shape of the finished article. If you want to roll a cone (and who doesn’t), you need to taper down the amount used towards the roach end.
You can actually put the roach in at this point too. Sit it at the side of the joint of the hand you write with. You want to line up the end of your roach with the edge of the paper. Move any materials away from the roach area before you put the roach in and then smooth the joint’s contents back up against it again.
Ideally, you want the materials, when slightly compacted, to form a perfectly straight line from the roach to the end of the joint itself. You probably won’t get this first go, but that’s what we’re aiming for.
Roll a Hash Joint: The Important Bit!
Rolling the joint is the hardest part of the whole task – so much so that many lifelong stoners struggle to roll a decent one. It’s difficult to explain and requires a lot of practice but here goes:
- Carefully pick up your rolling paper loaded with joint ingredients and roach. You want to be holding it in front of you in both hands between your thumbs and fingers. This is going to feel weird at first.
- Pinch the contents and roll them backward and forwards between your thumb and fingers. You’re not trying to roll the joint first time. This bit is about smoothing out all the ingredients into the correct shape.
- When you’re happy with your shaping efforts, you want to take the paper surrounding the roach between the thumb and fingers of the hand you write with and support the joint with the other hand about two-thirds of the way along.
- Supporting the paper at the back with your fingers, pull your thumbs down until you can push the edge of the paper behind the materials – particularly around the roach.
- Rollback the opposite way and you should see that all the materials and roach are now encased in the paper. You just need to continue rolling until only the gum is exposed along the edge of the joint.
- Lick the gum and stick it down along the joint.
- Poke the end of the joint down to take out any sagginess common in novice joints and so that you can twist the end so none of the good stuff falls out.
- Light it up and enjoy it!
“Can’t Roll” Hacks
As you probably gathered from the above, rolling is a bit of an art. It’s not the easiest thing to teach or explain. Once you understand the process it’s just about practicing a lot. However, for impatient folks, there are a few hacks you can employ to enjoy a higher quality joint in less time.
- Rolling machine: A rolling machine like the Futurola is a great way to create uniform quality joints fast, even for novices.
- Rolling mat: The same principle as a rolling machine, just a little more old-school.
- The fold-over-with-flat-surface trick: Ok, so there’s probably a better name for this but we don’t know it! A lot of people make perfectly smokable joints without really rolling them at all. Instead, they kind of wrap the paper around their ingredients by folding it over them and then again on itself. The results aren’t usually super-pretty but it’s easier than properly rolling a joint.
Save yourself the time and guarantee the perfect roll! We love the super easy to use, adjustable rolling box from RAW, and think you will too!
Keep on Rolling
That’s all there is to it. Hopefully, thanks to our guide on ‘How to Roll a Hash Joint’ you now have a pretty solid understanding of how to roll your very first hash joint. Hash is an often-underrated form of cannabis these days. It got a bad reputation in the late 1990s as an influx of terrible quality stuff flooded particularly the European market.
More recently, the quality is right back up there and there’s even more diversity than there is in the world of cannabis buds. A hash made from Blue Dream in bubble bags like will be worlds apart from that found in the Riff Mountains of Morocco. In fact, the sticky, treacle charas from Northern India is a particular favorite smoke here at the WeedRepublic!
For many, smoking hash is one of life’s great pleasures. The high is often mellower and it makes for a great daytime or practical smoke. However, the process of actually smoking it in a joint is quite a bit different than it is with buds. If you’re looking down at a tasty brown block of hash or a squidgy blob of charas