Categories
BLOG

how to save a joint

How to Save a Blunt For Later

January 06, 2019

Not everyone who decides to light up a blunt, joint, or pre-roll may want to smoke the entire thing in one sitting. Of course, the first question we hear people ask is “How can I store my half-smoked blunt, while also ensuring its freshness for when I decide to smoke later?”

Oxygen Is The Enemy

Like most natural products, the key factor that ruins freshness is right in front of you: Oxygen! Oxygen is the fuel for oxidation, and oxidation is the process by which the aging process becomes significantly accelerated. Just think about any books you may have had as a child – find them now, and they’ve likely yellowed, become dry and stale, & degraded in quality.

The major key to storing your half-used blunts is to make sure to keep it in an airtight container! Simple as that.

Best Option for Saving Your Blunts For Later

Usually, people stub out their blunt and store it in either a sealed plastic baggie, a glass jar/pill bottle, or in the cheap, flimsy packaging tubes they receive with their pre-rolls. However, plastic bags cannot protect your products from becoming damaged (nor are they reliable air seals), a glass jar isn’t easily transportable, and the cheap tubes have no way to avoid getting that ashy funk all over your blunt when you try to light it up for later (see below for a pretty familiar sight!)

The AshTrapThingy is the best storage device that was purpose built to solve all of these issues and is a must-have for those who want to be able to keep their half-smoked products in the best condition possible for smoking later.

If you want to learn a bit more about the AshTrapThingy, you can go the AshTrapThingy’s How to Use page . In a nutshell – it is the only blunt, joint, or pre-roll storage mechanism that contains a patented ash-trapping device integrated within the tube itself. This allows the user to place their still-lit product into the tube (no stubbing out necessary!), place the cap on, give it a small shake to let the ashes filter through, and then remove the end cap to dump the trapped ashes. (demonstrated in the How to Use page)

The AshTrapThingy was also put to the test multiple times and has shown its ability to remain airtight, smell-free, and waterproof (even when run through a 30 minute wash cycle!)

Finally, unlike other storage tubes, the AshTrapThingy is re-usable & easily washable (it has two open capped ends vs. the others which possess a single-cap / squeeze cap opening)

So, the next time someone asks you how to save your new and half-smoked blunts, joints, & pre-rolls for later – know that there is a solution out there for them that will keep your product clean, fresh, and protected!

Not everyone who decides to light up a blunt, joint, or pre-roll may want to smoke the entire thing in one sitting. Of course, the first question we hear people ask is "How can I store my half-smoked blunt, while also ensuring its freshness for when I decide to smoke later?"

How to roll a joint

Copy article link to clipboard.

Link copied to clipboard.

Contents

  1. What is a joint?
  2. What you need to roll a joint
  3. How to roll a joint
  4. Why do people like joints?
  5. Why do people hate joints?

Joints are one of the most popular ways to consume cannabis. There are several different types of joints in the world of weed, and a variety of methods to make them. Rolling a joint can be a highly personal, intricate craft, but with a few simple steps, any new toker can roll their very own. Read on to learn about the art of rolling a joint.

What is a joint?

A joint is a cannabis cigarette often hand-rolled by an individual. Some dispensaries offer prerolls, or joints rolled in-shop, for consumers to purchase, saving a few steps. A cannabis joint that includes both cannabis and tobacco is called a spliff, while a blunt is a joint rolled with heavy, dark, tobacco papers.

A joint is a cannabis cigarette often hand-rolled by an individual. Photo by: Gina Coleman/Weedmaps

Image lightbox

What you need to roll a joint

To roll a joint, you’ll need to assemble a handful of essential materials. First, select your favorite cannabis strain and set aside the amount of flower you want to smoke, typically about a third of a gram. Use a grinder to break apart your bud evenly. A rolling tray will help you keep your workspace neat and tidy.

To roll a joint, you’ll need to assemble a handful of essential materials: your favorite cannabis strain, a grinder, a rolling tray, joint paper, and a filter/crutch. Photo by: Gina Coleman/Weedmaps

Image lightbox

Round up your joint paper of choice. Dispensaries and smoke shops offer hemp, unbleached paper, and other materials to fit various preferences. Grab a filter, also called a crutch, or a thick piece of paper to create one, and you’ve got everything you need to roll a joint. If you don’t have a glass crutch handy, it’s easy to make a crutch on your own.

How to roll a joint

Step 1: Grind the cannabis

Use a grinder to grind up and separate the flower evenly. A grinder produces a consistent size and texture, which provides a smoother, more even smoke. If you don’t have a grinder, pick the bud apart with your fingers. Make the pieces more or less the same small size and work gently to minimize damage to the cannabis’ trichomes.

Use a grinder to grind up and separate the flower evenly. Photo by: Gina Coleman/Weedmaps

Image lightbox

Step 2: Make a crutch

Many smoke shops sell pre-made crutches to serve as the mouthpiece of a joint. While crutches aren’t essential, they help reinforce the mouthpiece and make a joint easier to hold. Crutches also boost the airflow through a joint and minimize the risk of burning your lips or inhaling tiny bits of marijuana during a hit.

To make a crutch, fold a piece of thick paper or cardstock into an accordion shape then wrap the last bit of paper around the accordion part. Photo by: Gina Coleman/Weedmaps

Image lightbox

To make a crutch, grab a piece of thick paper or cardstock and rip off a rectangle-shaped strip about the width of your joint’s mouthpiece. Fold most of the paper into an accordion shape then wrap the last bit of paper around the accordion part.

Step 3: Load the joint

Lay the rolling paper on the tray with the adhesive side facing away from you. Position the crutch where you want the mouthpiece to be and sprinkle marijuana onto the paper. Evenly spread the flower throughout the joint and avoid overstuffing it.

Evenly spread the flower throughout the joint and avoid overstuffing it. Photo by: Gina Coleman/Weedmaps

Image lightbox

To roll a cone joint, sprinkle less weed near the mouthpiece and more towards the tip, tapering as you move.

Step 4: Roll the joint

It’s finally time to get rolling. Use your thumb and index finger to pinch the paper into a taco shape, sifting the paper back and forth to distribute the bud evenly. It’s okay if some flower falls out,you can stuff it in later. Work the weed into a cylinder shape, not so loose that it burns unevenly and not so tight that it restricts airflow.

Use your thumb and index finger to pinch the paper into a taco shape, sifting the paper back and forth to distribute the bud evenly. Photo by: Gina Coleman/Weedmaps

Image lightbox

Tuck one side of the rolling paper into the joint and slowly roll it back towards the adhesive side, tucking in the bud as you go. Lick or wet the sticky adhesive and start at the mouthpiece end to slowly seal the joint.

Lick or wet the sticky adhesive and start at the mouthpiece end to slowly seal the joint. Photo by: Gina Coleman/Weedmaps

Image lightbox

Once it’s sealed, grab a pen, toothpick, or another long cylindrical object to pack down the cannabis towards the mouthpiece. This is where you can add back any weed lost during the rolling phase.

Once it’s sealed, grab a pen, toothpick, or another long cylindrical object to pack down the cannabis towards the mouthpiece. Photo by: Gina Coleman/Weedmaps

Image lightbox

Step 5: Seal the deal

Twist the extra paper at the tip of the joint to seal everything shut.

Twist the extra paper at the tip of the joint to seal everything shut. Photo by: Gina Coleman/Weedmaps

Image lightbox

Finally, it’s time to spark up your joint and inhale through the mouthpiece. Enjoy!

Finally, it’s time to spark up your joint and inhale through the mouthpiece. Photo by: Gina Coleman/Weedmaps

Image lightbox

Why do people like joints?

Cannabis consumers love joints for a wide variety of reasons. For many, joints serve as the entry point into the cannabis world and smoking. Some like the way terpenes smell as the joint smoke spirals into the air. Others appreciate the fact you only need to spark up once to enjoy a joint, compared to the constant lighting of a pipe or the heavy-duty torching that dabs require.

Joints are also highly mobile, easy to share in a group setting, and easy to store if you want to smoke some and save the rest for a later day. According to an analysis by the RAND Corporation, an average joint fits about 0.32 grams of weed, making it a potent cannabis experience for an individual or enough for everyone when shared in a session. When completed, there’s little to clean up except for the roach and some ash.

Many joint rollers find the process of crafting joints therapeutic and consider the ritual an essential part of their consumption process.

Why do people hate joints?

Joints aren’t the most efficient way of consuming weed, and many users choose other methods to stretch their budget and maximize the experience of their bud. If you don’t smoke a joint fast, the flame on the tip will burn off precious trichomes and terpenes. Joints aren’t the best choice for marijuana consumers seeking a leisurely, lengthy smoking session.

How to roll a joint Copy article link to clipboard. Link copied to clipboard. Contents What is a joint? What you need to roll a joint How to roll a joint Why do ]]>