Categories
BLOG

micro torches

MINIS AND MICRO

The Micro and Mini Torches use high-tech light sources to give impressive performance with a compact size, designed for easy pocket storage, and are CE marked to the ATEX Directive and IECEx certified for safe use in potentially explosive gas, vapour, mist or dust atmospheres, where a T4 or T5 temperature class permits. All models are approved to Group I for use in mining applications.

Mini and Micro Torches, M-10, M-20, M-40 & M-60

Jump to:

Product Information

M-10, M-20, M-40, M-60, M-60MOD
ZONES: 0, 1, 2, 20, 21 AND 22

The LED models; M-10 Micro, M-40 and M-60 Minis are approved as Category 1 equipment for use in Gas Zones 0, 1 and 2, and Dust Zones 20, 21, 21 and the M-20 Xenon Mini is approved as Category 2 equipment for use in Gas Zones 1 and 2.

The M-10 Micro has a single white 5mm ‘Nichia’ LED light source and is powered by four alkaline LR44 ‘button cells’, giving an impressive beam with a two hour duration from a very compact size. The M-20 Mini uses a Xenon filament bulb powered by two LR03 ‘AAA’ cells, giving an excellent narrow beam of light with good range and up to 2.3 hours duration. The M-40 Mini has a cluster of three white 5mm ‘Nichia’ LEDs, and the M-60 Mini uses a single high power Cree LED giving remarkable light output; both products are powered by three alkaline LR1 ‘N’ cells giving up to ten hours of usable light with the M-40 and up to 3.5 hours* of usable light with the M-60. All supplied with cells.

The Micro and Mini Torches have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance and the polycarbonate lens is set-back within the lens ring to minimise risk of damage. All models have a lanyard hole (M-10 Micro supplied with neck cord), an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single-handed switching, which is shrouded to guard against accidental operation. All models are certified IP67, sealed against water/dust ingress.

IMPA Codes:

79 22 76 – M-10
79 22 78 – M-40
79 22 79 – M-60

NSN codes:

handy size

Easily attached to workwear or carried in pocket

Wolf Safety – Hazardous Area Lighting – Explosion Protected Lighting – Portable and Temporary Lighting – ATEX and IECEx Certified Lighting

max flame pro hand torch butane

This blow torch is ergonomically designed for multi-directional use, and features a 20° angle precision nozzle with a high output anti-flaring flame. Its powerful and stable flame enables continuous use for demanding tasks, such as soldering, jewellery repair and metal sculpting.

Instant ignition system

Adjustable flame control

Knurled aluminium body for grip

The maximum temperature is approximately 1,250°C (2,280°F), with a burn time of 30 minutes for the large flame and 60 minutes for the small flame

max flame pro hand torch butane This blow torch is ergonomically designed for multi-directional use, and features a 20° angle precision nozzle with a high output anti-flaring flame. Its powerful ]]>