Pax Vaporizer Secrets and Tricks – Pax 2 & Pax 3 Vapes NZ
Get even more out of your PAX Vaporizer NZ.
Answer : Yes.
Holding the Pax 2 horizontally in front of you spin it smoothly three times towards or away from you to change modes. Be careful not to shake the Pax 2, this will not register as a spin and throw your count off. The below modes are listed in the order they show up. It’s easier to count spins in successful cycles of 3 than in total. Therefore Simon is five cycles of three spins, instead of 15 spins in total. If you try to keep count you’ll constantly find that you’ll need to add a few extra spins because it’s difficult to make every spin count.
All four lights are different and cycle through different colors. There appears to be a rhythm/pattern to the color cycle. Lip sensor activation increases speed of color change. Oven is on. Standby timer extended to one minute between sensing movement or lip.
All four lights are stationary. When the Pax 2 is moved the lights jump into a random light configuration, occasionally one or more of the lights are very dim or off. If the Pax 2 is held face down the lights flicker and change rapidly. Lip sensor activation makes the lights flicker and change rapidly for up to 10 seconds. At 10 consecutive seconds of lip sensor activation the lights freeze. Removing your lips and replacing them starts another 10 second flicker display. Oven is on. Standby disabled.
In this mode all four lights show the same color and cycle through colors while the Pax 2 is being moved, when still, the lights are off. Waving the Pax 2 through the air yields a color changing stream of light. The heater can be turned off in this mode by selecting a fifth available temperature, all four lights blue.
The lights react to movement and position of the Pax 2. When laid flat the Pax 2 shows blue. When face down, an orangish-yellow. When I hold the Pax 2 upright and give it a little circular flick, the colors begin to cycle with a noticeable pattern. The colors can be seen transitioning from one light to the next, as if there is a big globe of colors inside and the lights reflect whichever colors face forward. The heater can be turned off in this mode by selecting a fifth available temperature, all four lights blue.
Spin the Pax 2 until all four lights flash white three times. The Simon game will begin. Hold the Pax 2 face up, horizontally in front of you. Observe the pattern displayed on the lights, then repeat the sequence by leaning the Pax 2 towards the appropriate light. The heater can be turned off in this mode by selecting a fifth available temperature, all four lights blue.
Funky Town Tone
Pax 2 faintly plays the tune to Funky Town when it turns on. You can hear it if you’re within a few inches of the Pax 2 when it plays. Difficult to hear unless you’re listening for it. To unlock this feature beat a 20 step sequence in the Simon game. The Pax 2 will confirm unlock by flashing the four lights red, blue, green, and yellow and playing the Funky Town tune. To disable the tone simply go into the temperature settings and press the button five times quickly. The Pax 2 will confirm by flashing the four lights red, blue, green, and yellow.
Activating this mode causes the petals to flash a green pattern which moves back and forth. One thing to keep in mind is that you need to roll your Pax 2 three times in the opposite direction to enable it, unlike the rest of the Easter Eggs!
Although not technically a secret feature, stealth mode comes in really handy in certain situations so I thought that I’d share it. To activate stealth mode, simply shake your device while its displaying the startup pattern. Stealth mode will keep your Pax 2’s LEDs at a dim white for the duration of your session. To turn off stealth mode, simply turn your device off and then back on. I find stealth mode is great to use while I’m vaping before bed as well as in other places where low light is desirable.
Buy Best Portable Dry Herb Vape NZ.
Check out our Pax 2 and Pax 3 Vaporizers, we always have the latest colors when they are released in USA. Pax is our specialty brand, we have been importing & selling Pax in New Zealand and Australia since 2008.
Buy Pax 2 Vape NZ | Buy Pax 3 Vape NZ
Yes, we still sell Pax 2 and they are awesome! If you want a Pax and can’t afford a Pax 3, do not fear, the Pax 2 is still a great vape to buy. Highly recommended by Helenskinz.Get even more out of your Pax Vape NZ. Unlock all the hidden features in your Pax Vaporizer. Spin Technique Holding the Pax horizontally in front of you spin it.. all the secrets revealed! Helenskinz NZ your Pax Specialist.
PAX Lights: What Do They Mean?
The indicator light on every PAX portable vaporizer model serves as a window into how your device functions. Those four little LED petals, arranged in the shape of the PAX logo, will change color, blink, and fade to reflect your device’s mode and status. In this guide, we take you through the colors and functions of the LED indicator on the PAX 2 , PAX 3 , and PAX Era .
Reading the LED indicator on PAX 2 and PAX 3
The LED indicator light on PAX 2 and PAX 3 shares many of the same behaviors while the device is in use, while charging and indicating battery, and for setting temperature. Functionalities for PAX 2 and PAX 3 are the same unless otherwise noted.
- While checking the battery: The LED indicator will turn white while checking battery life. Each petal corresponds to the battery life in 25 percent increments. Four illuminated petals indicates 75% to 100% battery, for example.
- Low battery (PAX 2): The LED indicator will blink red three times, and then the device will shut off.
- Low battery (PAX 3): The upper-left petal will blink red three times.
While charging: The LED indicator will pulse white while charging.
- When changing the temperature on the device:
- One green petal – 360°F (180°C)
- Two yellow petals – 380°F (193°C)
- Three orange petals – 400°F (204°C)
- Four red petals – 420°F (215°C)
- When changing the temperature through the PAX Mobile app (PAX 3 only):
- The LEDs will blink to confirm the temperature selection.
- When changing the temperature on the device:
- In use:
- While heating: Purple pulsing petals indicate the device is heating.
- When the device is ready: The lights will change from purple to green.
- While drawing: The LED indicator light will pulse green.
- Entering standby mode: All four petals will turn blue.
- Color themes (PAX 3 only):
- Colors for select functions can be changed through the PAX Mobile app. Colors can be changed for LED indicator behavior during startup, which is set to a white swirl by default, heating, set to a fast purple up-wave by default, regulating, set to a green plasma by default, and standby, set to a slow blue down-wave by default.
Reading your PAX Era’s indicator light
PAX’s pod system vape has similar LED functionalities to PAX 2 and PAX 3. While this vape operates differently from PAX 2 and PAX 3, familiar basic functionalities such as battery charging and temperature settings remain unchanged.
- While charging: Each petal will pulse white while charging. The light turns solid white and the next petal begins to pulse as the device charges. Four solid white LEDs indicates that the battery is fully charged.
- Battery level: The LED indicator will turn white. Each petal corresponds to the approximate battery life in 25 percent increments.
- Low battery: The petals will turn red and blink three times before powering down.
- One green petal – low (520°F, 270°C)
- Two yellow petals – medium-low (610°F, 320°C)
- Three orange petals – medium-high (700°F, 370°C)
- Four red petals – high (790°F, 420°C)
- Custom temperature via PAX Mobile: The temperature you select will be displayed on the LED indicator between the high default setting and the low default setting.
- Pod insertion:
- Inserting the pod: White LEDs sweep downward
- Removing the pod: Blue LEDs sweep upward
- In use:
- While taking a draw: The LED indicator will be white and dim; brightness will increase as you reach the end of your draw.
- Usage monitoring: The petals will cycle through green (one puff per lit petal), blue (two puffs per lit petal), and red (three puffs per lit petal) to indicate the number of puffs you’ve taken in a session. For example, six puffs are represented visually by two green petals, indicating one puff each, and two blue petals, indicating two puffs each.
- Reset session usage: The LED light will turn green and swirl counter-clockwise.
- Child lock: The LED indicator will turn red and make a counter-clockwise motion.
Getting the most out of your PAX portable vaporizer
Understanding your LED indicator is an important step as you master your portable vaporizer. With just a quick glance, you’ll know exactly what your vaporizer is doing or what it needs to operate at its best. For further reading, we’ve put together detailed how-to guides for the three models discussed here. Click on the guide that matches the device you have at home, and bookmark it so you can quickly access answers to all your PAX vaporizer questions!PAX Lights: What Do They Mean? The indicator light on every PAX portable vaporizer model serves as a window into how your device functions. Those four little LED petals, arranged in the shape of ]]>