stok torch not working

My torch is malfunctioning!

Can’t get your torch to work? Try this common troubleshooting method first.

Sometimes air will get trapped inside the tank, which causes a vapor lock. To fix this problem, you simply need to push down on the fill pin to drain out all of the butane. Continue to hold for 5-10 seconds after all the butane has been released to release all of the built-up trapped air as well.

From there, refill your tank, allow to sit for 1-2 minutes for the butane to adjust to room temperature, and then you will be good to go.

Still can’t get it to work? Many of our torches come with a manufacturer’s warranty. Check out your torch’s packaging or the manufacturer’s website. You may be eligible for a replacement.

Shoot us an image of your malfunctioning product with a little information on what’s going wrong, and we’ll get you started on the warranty replacement process.

Can't get your torch to work? Try this common troubleshooting method first. Sometimes air will get trapped inside the tank, which causes a vapor lock. To fix th

How to Fix Your Butane Torch

Anyone who uses a butane torch regularly will probably realize that short of a total malfunction with any of its working parts, a butane torch generally only requires filling with a new butane to ensure its ongoing operation. These portable torches are surprisingly durable and if you are capable of filling the torch, you will likely experience no other issues in terms of keeping it maintained.

Always Use Manufacturer Recommended Butane

If your butane torch or lighter stops working, you should also make sure you are using the correct grade and brand of butane. Using the incorrect type, or low quality can often be the reason for your torch not operating correctly, so it’s always a good idea to check for any recommendations from the manufacturer with regard to the specific type of butane they recommend for your particular torch or lighter. One of the symptoms of lower grade fuel is flickering or sputtering of the flame, this symptom can also be caused by air in the fuel cell which can be resolved by removing the air.

Ignition Systems

Butane torches these days are generally equipped with instant electronic ignition systems and these have a reputation for being reliable technology. There will always be exceptions though and if your torch won’t ignite, you have a couple of options with regard to fixing it.

The first is to try and regulate the flow of gas because it may be too low for optimal ignition. You can turn the gas output all the way up then turn it back after the gas is ignited. If this doesn’t help, you could consider the warranty options on the torch and seek a replacement because it may be that the ignition is faulty.

The Nozzle

Under normal circumstances, the nozzle shouldn’t become clogged because butane is a ‘clean’ fuel and does not produce soot to clog the nozzle. What can occasionally happen though is if you are using the torch for soldering, a tiny piece of solder may become lodged and stuck in the nozzle. To fix your torch, you will need to turn the torch off and remove the offending particle(s) of solder. One way to clean out the nozzle is to shoot compressed air into the nozzle area where the gas exits the torch. This may dislodge any foreign matter that is causing the suboptimal performance.


Fixing your torch is not something which should concern you unduly because the most likely scenario for it not working will be because you need to fill the torch with quality butane gas. Filling a butane torch can generally be accomplished quickly and using the best quality butane will always help your torch to function at its optimal level. General care in looking after portable tools such as keeping them clean and in good order will also help to ensure the longevity of your torch.

If you use a butane torch regularly at some point you will probably have a problem with your torch, this article will tell you how to fix your butane torch. ]]>